Air 1 Heating supplied and installed Carrier 48TC single-packaged gas heating/electric cooling rooftop units (RTUs), Reznor gas heater, QMark electric heater, Loren Cook exhaust fans, Titus diffusers, and Honeywell thermostats.
Information about the products used:
Carrier WEATHERMAKER® 48TC Rooftop Unit – Carrier 48TC WEATHERMAKER® rooftop units were designed by customers for customers. With a gauge plug, centralized control center, plug & play accessory board, “no-strip screw” collars, and handled access panels, that has made the unit easy to install, easy to maintain, and easy to use. Units are pre-wired and pre-charged with Puron® (R-410A) refrigerant at the factory. The units are factory tested in both heating and cooling modes. Performance features include: ASHRAE 90.1 compliant; Up to 13 SEER and 11.1 EER; Gas efficiencies up to 82%; Cooling operating range up to 115 °F (46°C) and down to 25°F (-4°C) using winter start kit; Innovative non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain; Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay; and Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection.
Reznor UDAP Gas Heater – Reznor's V3 Series UDAP high efficiency heaters are excellent for space heating applications. These gas-fired unit heaters are power vented in order to eliminate heat losses up the flue pipe. Power vented models have a higher initial cost than similar “gravity” vented models, but will save money on fuel costs. UDAP heaters are designed for 82-83% thermal efficiency often meeting utility company thresholds for rebate incentives. All Reznor V3 series heaters are CSA Design Certified, and have a refreshing appearance with a glossy white cabinet finish.
QMark EFF Electric Heater – QMark’s high-capacity, heavy-duty fan-forced ceiling heaters are designed for use in commercial, industrial or institutional applications requiring electric fan forced heaters. They perform exceptionally well in such applications as entry ways, hallways, restrooms, stores, detention environments and similar large areas. These heaters will accommodate pneumatic/electric or low voltage controls commonly used with computerized energy management systems. The 1/4 inch mesh screen deters insertion of foreign objects.
Loren Cook ACRU-D VF Exhaust Fan – Cook power roof and wall ventilators provide maximum performance and durability in a wide variety of commercial and industrial air moving applications. Exhaust applications include general ventilation, fume-hood, paint booth and smoke control systems. AC unit top cap assembly is designed to provide weather protection for the motor and drive components while maintaining easy, tool free access for inspection and maintenance. Standard lifting lugs, located under the top cap, provide for safe, fast and efficient lifting of the unit to a rooftop. One piece fan base, which includes a high-efficiency inlet venturi and continuously welded curb cap corners, ensures weathertight conditions. Spun aluminum baffle is designed to provide smooth, turbulent-free airflow. Wheels are centrifugal type featuring non-overloading, backward-inclined blades and a tapered inlet shroud. Accurate performance is assured through compliance with the AMCA Certified Ratings Program. All units are licensed to bear the AMCA Certified Ratings Seal for Air and Sound Performance. Construction Features include: Downblast & upblast models; Direct & belt drive motors; Roof & wall mounts; Smoke & grease options; Easy access to motor & belts; Auto belt tensioner available; Electronially communtated motors available.
Titus Grilles, Registers and Diffusers – Titus Series TDC diffusers handle an unusually large amount of air for a given pressure drop and noise level. Their pleasing appearance harmonizes with various architectural details, especially in modular ceiling systems. Features and Benefits: Handles an unusually large amount of air for a given pressure drop and noise level; Pleasing appearance harmonizes with various architectural details especially modular ceiling systems; Maintains an unbroken horizontal flow from maximum cfm down to minimum.
Honeywell VisionPRO 8000 Thermostat – Honeywell’s touchscreen programmable thermostat is an effortless, 7-Day programmable thermostat that provides universal system compatibility, precise comfort control and is easy-to-program. It’s features include large, clear display with backlight shows the current and set temperature and time—even in the dark; menu-driven programming make setup effortless; beautiful ergonomic design is smart and sophisticated to match a customers’ lifestyle; touchscreen interaction; real-time clock keeps time during power failures and automatically updates to daylight savings; change/check reminders let you know when to service or replace filters or batteries; and various hold options allow you to override the program schedule, as desired.
About Air 1 Heating:
Air 1 Heating provides furnaces, heat pumps, air conditioners, and rooftop units to customers in the Puget Sound area, including: Auburn, Bellevue, Bonney Lake, Bothell, Buckley, Burien, Covington, Federal Way, Fife, Graham, Issaquah, Kent, Kirkland, Lacey, Lynnwood, Maple Valley, Puyallup, Redmond, Renton, Sammamish, Seattle, Spanaway, Sumner, Tacoma, King County, Kitsap County, Pierce County, Snohomish County, and Thurston County. Past Commercial customers include: Jersey Mike’s, Big 5 Sporting Goods, Sports Authority, Five Guys, The Rock Wood Fired Pizza, The Old Spaghetti Factory, Original Pancake House, Verizon Wireless, O’Reilly Auto Parts, 7-Eleven, Chevron Gas Station, Pierce College, UniBank, numerous churches, and more. For more information, visit www.air1heating.com.
The names of actual companies and products mentioned herein may be the trademarks of their respective owners.